banner



How To Install Turn Signal Camera

Rear View Camera Installation Instructions: Dos & Don'ts


If you've recently purchased a system from usa, please read through these easy instructions to larn how to install a rear view safety photographic camera. Installation tin can ordinarily be done by the customer, and we offering a price-complimentary tech support line should yous need further assistance.

Practise not install the monitor in directly sunlight. Nosotros suggest that the rear photographic camera should be mounted every bit high and centered equally possible. Tighten the camera cablevision connectors finger tight, and then tighten another one-half-turn with ii wrenches. This volition cause the seals to compress and become water tight. Connect the cerise trigger wire to a power source that is hot just when vehicle is started. (Practice NOT CONNECT TO THE SAME POWER SOURCE AS THE RADIO.) Connect the green trigger wire to a power source that is hot only when the vehicle is in reverse (i.due east. back-up lights or back-up beeper). This will cause the rear photographic camera to turn on automatically when vehicle is placed in reverse.

NEVER CONNECT THE Dark-green TRIGGER WIRE TO THE RED TRIGGER WIRE. DOING SO Volition CAUSE THE MONITOR TO Presume THE VEHICLE IS IN Reverse. THIS WILL Cause ALL MONITOR BUTTONS TO LOCK AND THE MONITOR WILL ONLY Brandish THE REAR Photographic camera.

The black wire should be grounded to the chassis. The camera system volition at present turn on automatically when placed in reverse. If desired, the photographic camera system tin can plow on automatically when the vehicle is started. Go to the menu option on the monitor, select Auto-On, and plough it to the On position. Also, the monitor can be turned on manually by pressing the ability button.

Wiring side cameras for automated activation: The camera 2 input is used for the correct side photographic camera. Connect the white trigger wire to FRONT turn signal wire. (DO NOT CONNECT TO REAR Signal WIRES As THEY ARE ALSO USED AS BRAKE LIGHTS). The camera three input is used for the left side camera. Connect the blue wire to the Front end plow signal wire. The side camera volition now come up on automatically when the turn signals are engaged.

If y'all take any further questions virtually how to install a fill-in camera, delight call our Tech Support Line at 800-496-1590.

Source: https://www.rearviewsystems.com/rear-view-camera-installation-instructions-s/1514.htm

Posted by: herringcomentend.blogspot.com

0 Response to "How To Install Turn Signal Camera"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel